GPS navigation: one-way signals, four satellites, one receiver

Interactive educational model of real GPS's broadcast architecture. Satellites transmit; the receiver listens and solves for position and its own clock offset. The 3D orbits are visually accelerated, while radio flight times and corrections are computed separately at physical scale.

3D GPS constellation · six orbital planes

Drag the globe to rotate the 3D view. Six planes at 55° inclination, 24 nominal satellites. Four visible satellites are highlighted for the navigation solution; dashed lines show other orbits. Radio pulses travel one way, satellite to ground. The visualization time scale is accelerated independently of physical signal flight time.

Selected transmission / reception

The displayed signal journey is a slowed-down replay of an actual ~70–90 ms flight. It is not a two-way exchange.

Navigation solution: four pseudoranges

SatelliteGeometric rangePseudorange

The four-satellite solver estimates receiver x, y, z and clock bias. Four satellites above the local horizon are chosen dynamically from the 24-satellite synthetic constellation. Geometry and dilution of precision vary with time.

Equations and corrections used

1. Signal emission and reception: moving satellite
c (t_r − t_e) = |r_R(t_r) − r_S(t_e)|

Iteratively solve for the emission epoch t_e from the reception epoch t_r, evaluating the satellite at emission and receiver at reception. In this demonstration both positions are represented in an Earth-centered inertial (ECI) frame.

2. Pseudorange and four unknowns
P_i = |r_R(t_r) − r_S,i(t_e)| + c (δt_R − δt_S,i) + I_i + T_i + ε_i

Four independent satellites provide four equations for receiver position (x, y, z) and receiver clock bias δt_R. Satellite clock errors are corrected from broadcast parameters; the display includes illustrative atmospheric terms.

3. Satellite clock model and relativity
δt_S = a0 + a1 (t − toc) + a2 (t − toc)² + Δt_rel Δt_rel = −2 (r · v) / c² ≈ F e √a sin(E) F = −2 √μ / c² (dτ/dt) ≈ 1 + Φ/c² − v²/(2c²)

The periodic eccentricity correction is computed from an elliptical Kepler orbit. A typical GPS satellite's net rate relative to an Earth geoid reference is approximately +38.6 μs/day before the conventional frequency offset is applied. The receiver uses corrected satellite time, not unadjusted oscillator ticks.

4. Earth rotation (Sagnac) and propagation
r_R^ECI(t_r) = Rz(ω_E t_r) r_R^ECEF r_S^ECI(t_e) = Rz(ω_E t_e) r_S^ECEF(t_e) Δρ_Sagnac ≈ (ω_E / c) (x_S y_R − y_S x_R) [sign depends on convention]

For a moving Earth-fixed receiver, rotate endpoint coordinates to a common inertial frame at their respective event times. The model calculates geometric flight time in ECI; the Sagnac figure is the difference from a naive same-epoch ECEF distance.

5. Atmosphere, Shapiro delay, and instrumentation
P = ρ + c(δt_R − δt_S) + I + T + S + b_hw + noise Δt_Shapiro = (2 GM/c³) ln[(r_S+r_R+ρ)/(r_S+r_R−ρ)]

Shapiro is calculated as an illustrative weak-field Earth correction. Ionospheric and tropospheric delays are adjustable illustrative range terms (not live atmospheric observations). Hardware bias and multipath are omitted from the solved example. A production receiver also handles antenna phase centers, Earth orientation, detailed ephemerides, signal-dependent biases and other effects.

6. Proper time origin versus clock display
Choose an event E0 on the satellite worldline. τ(E0) = 0 τ(E1) − τ(E0) = ∫[E0→E1] (dτ/dt) dt

Assigning τ = 0 is a conventional origin choice. It is not the same operation as setting a satellite clock's displayed GPS time. The navigation solution does not require all proper-time parameters to have a common origin.

Scope: this is a transparent educational model, not an operational GPS receiver. Its orbit is synthetic, its four-satellite selection and geometry are illustrative, and several propagation effects are simplified or parameterized. The actual GPS system is primarily one-way satellite-to-user broadcast; control-segment uplinks are a separate function.